Service · Hendersonville, TN & Middle Tennessee

Excavating & Rock Removal

Middle Tennessee is limestone country, and rock is the single biggest reason dirt work here goes over budget. We break it, pull it, trench through it, and haul it off — and we tell you up front how rock is priced instead of discovering it on day two.

✓ Free On-Site Estimates ✓ Owner-Operated ✓ Hendersonville, TN Based ✓ Middle Tennessee Service Area

Excavating & Rock Removal in Middle Tennessee

Hendersonville sits on the Central Basin, and the Central Basin sits on limestone. On a great many properties around Sumner and Davidson County the depth to solid rock is measured in inches rather than feet — and it is not uniform. You can dig four feet of clean clay on one side of a building pad and hit shelf at eighteen inches twenty feet away.

This is the single biggest reason excavation projects in Middle Tennessee run over budget. A contractor who quotes a flat price without addressing rock is either going to eat it, change-order you, or has already padded the number without telling you which. We handle it differently: we tell you where we expect rock to be, how rock gets priced if we find it, and what the alternatives are — before the work starts.

Dunnebacke Constructors does excavation and rock removal across Hendersonville, Gallatin, Goodlettsville, Nashville, and the surrounding counties, including breaking, trenching through rock, boulder removal, and rock haul-off.

Our Rock & Excavation Services

Rock Excavation & Breaking

Hydraulic hammer work to break shallow limestone shelf for pads, footings, trenches, and drainage runs — the standard method for residential rock in Middle Tennessee.

Boulder & Surface Rock

Surface boulders and rock outcrops pulled, broken down, and removed from yards, pastures, and building envelopes. Usable stone can be stockpiled on site if you want it.

Rock Trenching

Trenching that has to go through rock — utility runs, drainage, water service. Slower and priced differently than dirt, and stated that way in the estimate from the start.

Pad & Footing Rock Excavation

Getting to design elevation when limestone is in the way. Cut to grade, with rock broken down small enough to be handled or removed rather than left as a high point.

Sinkhole & Void Assessment

Honest evaluation of depressions and suspected voids on karst terrain — including telling you when a feature needs a geotechnical engineer rather than a dirt contractor.

Rock Haul-Off

Broken rock and spoil hauled off the property, or stockpiled and repurposed on site as riprap, fill, or landscape stone where it is suitable and you want it kept.

Why Hendersonville Has So Much Rock

The Central Basin Limestone Shelf

Middle Tennessee’s Central Basin is underlain by Ordovician limestone, and in much of Sumner and Davidson County the soil mantle over that limestone is thin. The bedrock surface is also irregular rather than flat — it undulates, with pinnacles and troughs — which is why rock depth can change dramatically across a single lot with no warning at the surface.

Karst and What It Means for You

Limestone is soluble. Over geologic time, groundwater moving through it dissolves channels, voids, and cavities — terrain geologists call karst, and Middle Tennessee is textbook karst country. Practically, this means three things for property owners here: rock depth is unpredictable, water moves underground in ways that surface observation will not reveal, and closed depressions and sinkholes are a normal feature of the landscape rather than an anomaly.

Why It Matters Before You Build

Rock drives cost on everything that goes below grade: footings, pads, utility trenches, drainage runs, septic systems, and driveways. The honest thing a contractor can do is tell you early, so the decision about where a structure sits gets made with the information rather than after the fact. Moving a building envelope thirty feet on paper is free. Discovering shelf rock under half the footprint after footings are laid out is not.

How Rock Gets Removed

Hydraulic Hammer (Breaker)

The standard method for residential and light commercial rock in this area. A hydraulic breaker mounted on an excavator fractures the rock so it can be excavated and removed. It is slower than digging dirt — substantially slower — which is why rock work is typically priced hourly or by the job rather than by the yard.

Ripping

Weathered, fractured, or thinly bedded rock can sometimes be ripped with a heavy tooth rather than hammered, which is considerably faster where the rock cooperates. Whether it will cooperate is something you find out by trying it.

Breaking Down and Repurposing

Broken limestone is not automatically waste. Depending on size and quality it can be usable on site as riprap for channel and slope armoring, as fill in appropriate locations, or as landscape and wall stone. Where the material is good and you want it kept, we stockpile it rather than hauling it off and then selling you stone later.

What We Do Not Do

We do not blast. Blasting is specialized, licensed work with its own regulatory and insurance framework, and residential jobs in developed areas around Hendersonville rarely justify it anyway. If a project genuinely requires blasting, that is a referral to a licensed blasting contractor, not something we take on.

Sinkholes in Middle Tennessee

Sinkholes here are a normal consequence of karst geology, not a rare disaster. They form when the soil overlying a void in the limestone finally loses support and collapses into it, or when soil gradually ravels downward into a bedrock opening over years, producing a slow depression rather than a sudden hole.

What we can help with: assessing a depression on site, excavating to find out what is actually happening under it, and — for straightforward shallow features — addressing the soil raveling and correcting the surface drainage that is feeding water into it. Redirecting concentrated runoff away from a karst feature is frequently the most important single thing that can be done, because the water is what is driving the process.

What needs an engineer: anything active, deep, near a structure, or opening up over time. A sinkhole that connects to a real void in the bedrock is a geotechnical problem, and the remedies — graded aggregate plugs, grouting, engineered caps — belong to a geotechnical engineer, not a dirt contractor working from experience. Filling an active sinkhole with dirt is the single worst response available: the fill washes into the void, the depression returns, and in the meantime the surface looks stable when it is not.

We will look at it, dig it if digging tells us something, and tell you plainly which category we think you are in. If it is the engineering category we will say so rather than taking the job.

Our Process

1

Free On-Site Assessment

We walk the site and read what is visible — outcrops, surface rock, the shape of the ground, what the neighbors ran into. Nobody can see through dirt, but on Middle Tennessee karst an experienced read narrows the range considerably before anyone spends money.

2

Estimate With the Rock Question Answered

A firm price for the dirt work, a stated hourly rate for rock if we hit it, and an agreement that we call you before the rock meter starts running. No padded contingency, no surprise invoice.

3

Break, Excavate, and Remove

Hydraulic hammer or ripping depending on what the rock allows, excavated to design grade. Usable stone gets stockpiled if you want it kept; the rest is hauled off rather than left in a pile.

4

Backfill, Grade, Seed, and Straw

Site brought back to grade, disturbed ground seeded and strawed, and the property left clean. Owner Austyn Dunnebacke is on every job site.

Owner on every job. Austyn Dunnebacke personally assesses and works every project. You are not dealing with a salesperson and a crew you have never met — the same person who looks at the work is the one who does it.

How Much Does Rock Removal Cost?

Pricing on this kind of work is job dependent. Every property is different — the price comes down to how hard the rock is and how much of it there is, which isn't fully known until a hammer is on it — so we don't publish price ranges that may not fit your job.

We're happy to give a free quote to anyone interested. Call (615) 887-1194 or request a free estimate — we'll come look at the property, tell you what's going on, and give you a specific price before any work begins. No obligation.

Areas We Serve

We work throughout Middle Tennessee, with quick response times across Sumner, Davidson, Robertson, Wilson, Montgomery, and Williamson counties.

Hendersonville, TN Gallatin, TN Goodlettsville, TN White House, TN Springfield, TN Millersville, TN Portland, TN Mount Juliet, TN Lebanon, TN Nashville, TN Brentwood, TN Clarksville, TN

Frequently Asked Questions

How do you remove rock without blasting?
A hydraulic breaker — a hammer attachment on an excavator — fractures the rock so it can be dug out and removed. That is the standard method for residential and light commercial rock in Middle Tennessee. Weathered or thinly bedded rock can sometimes be ripped with a heavy tooth instead, which is faster where the rock allows it. We do not blast; blasting is licensed specialty work and if a project genuinely needs it, that is a referral to a licensed blasting contractor.
How much does rock excavation cost in Hendersonville?
Pricing is job dependent — it comes down to how hard the rock is and how much of it there is, which isn't fully known until a hammer is on it. Rather than publish price ranges that may not fit your property, we're happy to give a free quote to anyone interested. We'll come look at it and give you a specific price before any work starts.
Why is there so much rock in Hendersonville and Sumner County?
Middle Tennessee’s Central Basin is underlain by shallow Ordovician limestone, and in much of Sumner and Davidson County the soil over that bedrock is thin. The rock surface is also irregular rather than level — it has pinnacles and troughs — so depth to rock can change dramatically across a single lot with nothing at the surface to indicate it. That unpredictability, not the rock itself, is what makes excavation budgets here difficult.
Why does my property have sinkholes?
Middle Tennessee is karst terrain. Limestone is soluble, and groundwater moving through it over geologic time dissolves voids and channels in the bedrock. A sinkhole forms when the soil overlying one of those voids loses support — either collapsing suddenly, or raveling downward gradually to produce a slow depression. Closed depressions are a normal landscape feature here, not an anomaly. Concentrated surface runoff directed into one accelerates the process considerably, which is why drainage correction is often the most valuable thing that can be done.
Can a sinkhole be repaired permanently?
Shallow, stable, non-active features can often be addressed by excavating to understand what is happening, dealing with the soil raveling, and — most importantly — redirecting the concentrated water that is feeding it. Anything active, deep, near a structure, or enlarging over time is a geotechnical engineering problem, and the appropriate remedies belong to an engineer. What you should not do under any circumstances is fill an active sinkhole with dirt: the fill migrates into the void, the depression comes back, and in the meantime the surface looks sound when it is not. We will assess yours and tell you plainly which category it falls into.
Do you haul the rock off, or can I keep it?
Either. Broken limestone is often usable — depending on size and quality it works as riprap for channel and slope armoring, as fill in appropriate locations, or as landscape and wall stone. If the material is good and you want it, we stockpile it on site rather than hauling it off and selling you stone later. What you do not want kept gets loaded and hauled off the property rather than left in a pile.

Rock Is Not a Surprise Here

It is the default assumption. Get a free on-site assessment with the rock question answered honestly before the project starts instead of after.

Request Free Estimate 📞 Call (615) 887-1194